Precautions for the Use of Shower Head and Mixer

The shower head and mixer are a must-have item in the bathroom, but the shower head will leave residues after being used for a long time, which will block the small holes of the shower head, so for better use, it is best to remove the shower head and clean it every once in a while. Then, let me introduce to you how to clean the shower head and the precautions for the use of the shower head.

How to clean the shower head and mixer?

1. The main raw material for cleaning the shower head is white vinegar, which is also a common material. After we remove the shower head, put it into a small basin filled with white vinegar and soak it for about two quarters of an hour. After soaking, brush it with a toothbrush. , and then rinse with clean water; if there is hard water sediment, scrub with lemon slices.

1. When cleaning the shower head, special attention should be paid not to using strong acid (white vinegar is better), so as not to cause corrosion to the shower surface. To ensure that the nozzles are not blocked, we should clean the shower nozzles every six months or less, so that you no longer have to worry about the nozzles being blocked suddenly when you take a shower, which will affect your bathing mood.

1. To ensure the service life of the shower head, we should make it not directly under the shower during installation, and the distance from the shower should be more than 60cm, and often use a soft cloth to stick a little flour to wipe the surface of the shower head, so that it is still as new.

Precautions for the use of shower head and mixer

1. To ensure the durability of the product, please be as gentle and slow as possible when operating.

1. After using for a long time, if it is found that the shower spray does not flow out regularly and intermittently, there will be debris blocking the water outlet. At this time, you only need to gently move the soft glue of the shower outlet by hand, and small debris will automatically flush out the water.

1. Do not use strong acid when removing scale, so as not to cause corrosion to the shower surface.

1. The hot water supply side of the faucet is in a high temperature state, please be careful not to let the skin directly touch the surface to avoid burns.

1. Do not use decontamination powder. Scrub with granular detergents such as polishing powder or nylon.

1. Since the acid detergent can erode the electroplating layer, it should not be used when cleaning the clothes; if the tiles are washed with acid, the shower should be rinsed immediately and wiped with a soft cloth.

How to choose a shower head and mixer?

✔️Look at the spray effect

When purchasing, you can see the spray effect. A good shower head can ensure that every small spray hole sprays evenly and consistently, and can ensure a smooth and dripping shower effect under different water pressures. When choosing, you can test the water to see whether the spray water flow is uniform.

✔️Look at the injection method

Depending on the spraying method, the shower head can be divided into a natural and comfortable rain shower type, a dynamic massage type, a comfortable and warm spray type, a smooth and soft water column type, and a water-saving drip type.

✔️Look at the surface coating

The quality and service life of the shower coating will affect the quality and service life. A good coating is kept at a high temperature of 150 ° C for 1 hour without foaming or wrinkling. When choosing, you can see its gloss and smoothness, bright and smooth flowers The sprinkler shows that the coating is uniform, and the quality of the sprinkler will be better.

Conclusion

We have a custom black shower head and mixer for sale, for more information, please kindly contact us at any time. If you also have an interest in outdoor shower fixtures, we are glad to answer for you.